Hongqi Bridge Collapse: Why Bridge Structural Health Monitoring Is Essential
Part of the Hongqi Bridge in Sichuan, China, collapsed in November 2025 after a landslide, months after opening. What the case shows about monitoring slopes, foundations and bridge superstructures.

In November 2025, part of the 758-metre Hongqi Bridge in Sichuan, China, collapsed just months after opening to traffic. The bridge had been closed the day before and no casualties were reported, but the incident raises a critical question: how well do we understand the behaviour of modern bridges and viaducts over time?
The incident is a clear reminder that bridge structural health monitoring is needed to understand how critical assets behave over their life, not only at the moment of failure (Reuters).
1. What happened at the Hongqi Bridge?
The Hongqi Bridge in Maerkang, Sichuan Province, was built on China National Highway 317, connecting Sichuan with Tibet across steep mountainous terrain. The bridge is about 758 metres long, with piers up to 172 metres high, carrying a two-lane road across a deep canyon near the Shuangjiangkou hydropower project (Wikipedia).
- Construction was completed in early 2025 and the bridge opened to traffic in April 2025.
- On 10 November 2025, local authorities noticed cracks in nearby slopes and roads and signs of terrain deformation on the mountainside. The bridge was closed to traffic as a precaution.
- On 11 November 2025, a landslide on the right-bank slope triggered the collapse of the western approach and roadbed. The main spans largely remained standing (The Washington Post).
- Thanks to the earlier closure, no casualties were reported (The Guardian).
Initial official statements pointed to the landslide as the primary cause. Engineers and the public have also raised broader questions about geological risk, slope management and possible design or construction deficiencies in such terrain (Eos, The Landslide Blog).

2. How can a new bridge become so risky so quickly?
The instinctive public question is: “How can a bridge that opened just months ago partially collapse?” From an engineering perspective, the picture is more nuanced.
2.1 Geotechnical risk can outweigh superstructure quality
Even with a well-designed and well-built superstructure, the weakest link is often the ground:
- steep slopes and landslide-prone geology,
- changing groundwater conditions,
- large hydraulic projects such as nearby reservoirs altering the stress state,
- heavy rainfall and long-term weathering.
The Hongqi case shows that a sound bridge on an unstable slope is still a high-risk system.
2.2 Warning signs existed, but late in the process
Visible cracks and terrain shifts were detected and the bridge was closed in time, a successful example of emergency risk management. The strategic question is whether such signals could have been seen earlier and more quantitatively, before visible damage. This is where continuous monitoring makes the difference between reactive and proactive safety.
2.3 Structures live in a changing environment
Design codes and calculations are the starting point. Once in service, a bridge is exposed to:
- daily and seasonal temperature cycles,
- traffic loading and fatigue,
- earthquakes and aftershocks,
- rainfall, reservoir level changes and groundwater fluctuations,
- long-term soil creep and consolidation.
Without long-term monitoring, we see only snapshots of a bridge’s condition. Bridge structural health monitoring turns these snapshots into a continuous record of how the structure and its foundations evolve under real conditions.
3. What should bridge monitoring include?
3.1 Geotechnical and slope monitoring
Monitoring should cover not only the deck and piers but also the approaches, embankments and surrounding slopes:
- Tilt sensors and in-place inclinometers to detect rotation and movement in slopes, abutments and retaining structures.
- Displacement and settlement sensors to track long-term settlement in approach fills and abutments.
- Hydrological and environmental sensors: rain gauges, groundwater and pore-pressure sensors and reservoir level data link water conditions to slope stability.
Integrated into a real-time platform with threshold-based alarms, these measurements let engineers move from “we saw cracks yesterday” to “we saw the slope trend changing weeks ago”.
3.2 Dynamic monitoring of the superstructure
- Accelerometers at mid-span and on piers record vibration under traffic, wind and earthquakes and enable operational modal analysis to track natural frequencies, mode shapes and damping.
- Strain gauges and displacement sensors measure strain and deformation at critical sections, expansion joints and bearings.
Changes in dynamic properties over time can indicate stiffness loss, damage or changes in boundary conditions, enabling investigation before visible distress appears.
3.3 Models and early warning logic
- Numerical models provide a baseline for normal behaviour under different loading and environmental conditions.
- Data-driven anomaly detection uses historical data to detect when the system leaves its normal operating envelope.
- Risk-based thresholds and colour-coded alarms combine slope, structure and environment into one risk picture for owners and operators.
In a case like Hongqi, a combined indicator (slope tilt, rainfall or reservoir level and settlement trends) could potentially have provided earlier, quantitative warnings before large geometry changes or cracks appeared.
4. What we take from the Hongqi case
StructHEALTH’s monitoring systems for bridges, viaducts and retaining walls are built around these lessons:
- Sensor layer: accelerometers, tilt sensors, displacement and crack sensors, temperature and environmental sensors, with industrial communication such as PoE and CAN bus.
- Data acquisition and communication: reliable transfer of data from demanding sites to the cloud or to on-premise servers.
- Analysis and visualisation: web-based dashboards with map views, time- and frequency-domain tools, thresholds and alarm rules.
The key question is not “Is the bridge finished?” but “How well do we understand and track this bridge throughout its life cycle?” The goal is to detect risk build-up systematically, so that operators can restrict traffic in advance, use alternative routes and plan inspections, retrofits or mitigation measures.
5. Conclusion: continuous monitoring should be the standard for bridges
Building an impressive bridge is not enough; we must equally invest in monitoring the ground, slopes and environment that support it.
For mountainous and landslide-prone regions, bridges interacting with reservoirs and hydropower schemes, and critical highway corridors, bridge structural health monitoring is a baseline safety requirement.

StructHEALTH bridge and viaduct monitoring
In Türkiye and the surrounding region, StructHEALTH provides end-to-end monitoring for bridges and viaducts: sensor selection and engineering design, installation and commissioning, data acquisition and analysis, and web-based dashboards and alarm scenarios.
See our bridge and viaduct monitoring solutions or contact us to discuss your project.
