A Guide to Installing Structural Health Monitoring Devices on Your Structure
A step-by-step overview of installing structural health monitoring devices: assessment, sensor selection, placement, mounting, wiring, calibration, data acquisition and maintenance.

Structural health monitoring (SHM) has become an essential tool for assessing the condition of buildings and infrastructure. With SHM devices, engineers and asset managers can monitor structures in real time, detect damage early and prioritise maintenance. This guide gives a step-by-step overview of installing SHM devices on a structure.
Understanding structural health monitoring
Before the installation process, it helps to understand the fundamentals of SHM. SHM uses sensors to gather data on parameters such as vibration, strain, temperature and corrosion. The data is analysed to assess structural integrity and detect signs of deterioration or damage.
Pre-installation preparation
The first step is a structural assessment. It identifies critical areas, potential points of failure and the types of sensors needed. The structure’s design, materials, expected loads and environmental conditions should all be considered at this stage.
Selecting the right SHM devices
Choosing appropriate devices is crucial. Different sensors measure different parameters and suit different structural configurations. Common types include accelerometers, strain gauges, displacement sensors and temperature sensors. Consider the sensor’s measurement range, resolution, noise level and accuracy, its durability, compatibility with existing infrastructure and data communication protocols.
Installation process
Installation typically involves several key steps:
- Sensor placement: Based on the structural assessment, determine the optimal sensor locations. Critical structural elements such as beams, columns and foundations should be prioritised.
- Mounting: Fix the sensors to the structure with suitable mounting hardware so that they are rigidly coupled to the elements being monitored.
- Wiring: Connect the sensors to the data acquisition system with suitable cabling. Plan cable routes to minimise interference and ensure reliable data transmission.
- Calibration: Calibrate the sensors following the manufacturer’s guidelines and recalibrate periodically to maintain measurement accuracy.
Data acquisition and analysis
Once the sensors are installed and calibrated, the data acquisition system collects their measurements. This may involve data loggers, a centralised monitoring system or wireless communication. The collected data is then analysed with appropriate techniques to assess structural behaviour and performance.
Maintenance and calibration
Regular maintenance keeps an SHM system reliable. Schedule routine inspections to check for sensor damage or malfunction and recalibrate as necessary.
Conclusion
Structural health monitoring is a proactive approach to asset management and safety. An effective SHM system provides measured information about the condition of a structure and supports data-driven decisions on maintenance, repair and operation.
SHM is not a one-time task but an ongoing commitment. As structures age and environmental conditions change, continuous monitoring and periodic assessment help detect potential issues early. Monitoring the health of your infrastructure can also help optimise asset performance, extend service life, reduce life-cycle costs and support predictive maintenance and investment planning.

Contact us for help with monitoring your structures.
